STONE PICKER SP-2
Technicial Specifications
STONE PICKER TECHNICAL DETAILS
| MACHINE LENGTH (A) | 4500 mm | MACHINE WIDTH (B) | 2140 mm |
| MACHINE HEIGHT (C) | 2300 mm | DISCHARGING HEIGHT | 2100 mm |
| WORKING WIDTH (D) | 1400 mm | WORKING DEPTH | 200 mm |
| SCREEN WIDTH (E) | 1235 mm | SCREEN HEIGHT | 880 mm |
| DISTANCES BETWEEN SCREENS (F) | 30 mm | SCREEN ANGLE | 37 (0) |
| TOTAL SCREENS | 22 | TANK CAPACITY | 2000 kg |
| TANK WIDTH | 1210 mm | TANK ANGLE | 15 (0) |
| PALLET WIDTH | 1240 mm | PALLET DIAMETER | 1400 mm |
| TOTAL PALLET FINGERS | 42 pieces | TOTAL FINGER SETS | 3 pieces |
| MACHINE WEIGHT | 2700 kg | PTO ROTATION | 540 rpm |
| PALLET ROTATION | 90 rpm | TIRE DIMENSIONS | 400/60-5,5 mm |
| MINIMUM REQUESTED POWER | 60 hp | TANK VOLUME | 1,4 m³ |
HYDRAULIC ARM PULL
Revolutionary Hydraulic Pull helps your machine to get movement with your tractors hydraulic arms instead of regular pull. This hydraulic arms also supports vertical movement; helps your machine get deeper from ground surface and show high performance of collecting stones. Beside all, taking movement power from double arm instead of single; allows less fuel and power consumption by equal distribution of power.
PALETTE
The pallet system, supported by linings and springs, used only by HMB in the world prevents the abnormally large stones damaging your machine. This system protects itself from damage in very large stones and helps you save lots of maintenance cost.
TANK
The tank produced from high quality materials is equipped with hydraulic lifts to work even in heavy loads without deformation as well as to reach higher during discharge due to its design.
FRONT LIFTS AND AUTOMATIC
This system is developed to prevent damage to the machine during abnormal elevations that you may face in the field, allows you to safely lift the front face of machine by raising up to 1 meter through the front lifts.
